9 TO 6 CDT
GMT minus 5 hours
Monday thru Friday
Do not call on
Sat. Sun. Please
Minimum Order $20
Priority Mail shipping for most items. UPS by request.
MUST browse the Catalog
area, and try to learn what you want. We no longer search our catalog for you.
this information ready:
1. Description of parts
2. Part Numbers
4. Dimensions where needed
BEFORE you call us please.
sure you are in the catalog area for your kind of piano--
Such as Grand
you are confused, call us for assistance.
If we do not answer the phone, we are probably here-- Just leave a message- we will
return your call (it may not be the same day).
And Lid Props
desks are very vulnerable since the are often the most fragile part of the piano,
and, to make things worse, they get loaded down too heavy with books. Spinet
and console desks are mounted with two small hinges at the base of the desk. This
plan is followed by 90% of piano makers, and it is insane. Grand desks are
made to hang all the way across the piano on two small rails. The desk itself
often comes in three pieces which some genius thought would carry the weight.
So, here are our desk offerings in case you or the moving man busted yours.
WORD INDEX OF THE WHOLE SITE:
Policy on Wood and Furniture Products
you receive a desk or other wood part which must be stained and finished,
EXAMINE IT BEFORE YOU PROCEED.
If there is any flaw which you cannot deal
with, it must be returned.
If you alter the product, or if you stain it,
we cannot return your payment.
If you find a flaw after staining or fitting
the product, WE WILL NOT REFUND YOUR MONEY.
Also, you must
call us at (800) 338-8863 for instructions to return the product.
If you return
it to us, we will deduct shipping costs to return it to our supplier.
must be returned to our supplier.
If you send it back without notifying
us and following instructions, you may not
receive a refund if our suppler
does not know you are our customer.
Console, and Studio Desk KIT
(May fit Grand Pianos in need of the hinged book
These desks are unfinished, but they are fine sanded
maple veneer on both sides.
Ends are rough sanded. 1/2" thick.
End hinges are down the page if you need
Order No. Price
SH857CH $ 49.00
SH858CH $ 45.00
Graphic shows hinge cutouts on bottom of SH856. This is incorrect.
All of these desks can use end hinges (SH1064)
End Hinges for Spinet and Console Piano Desks
Pair of hinges come with machine screws to mount to level desk area,
but NOT with brass wood screws
to mount hinges to desk. See below
If your holes
on the level part under the desk are 28 inches apart, or some other
distance not matching our desks, you will want to do the
1. Buy the desk next longer than
yours, never shorter.
This is so that the old holes are UNDER the new desk
new holes in line with the old ones, centering the desk precisely.
3. Make sure the new hardware leave
about 1/16 inch (total 1/8" overall) on
either end so you can put in
a spacer between the wood corner and the
4. Determine the length brass wood screw
you will need to remount the desk.
We do not send this because various
lengths may be appropriate.
Find the brass wood screws at ACE Hardware
5. We strongly
encourage adding some support behind the desk, out of sight,
to support the new desk so that the book load is shared
between the lower
hinges and the support against the lid of the piano.
SH1064 $ 9.50 Pair
Butt (Flap) Hinges-- 1-3/4" by 1"
SH567B $ 12.50 each
$ 20.00 each
FOR GRAND PIANOS
TIME VICTORIAN ERA DESKS NOW AVAILABLE
These items are aimed
at the Victorian period including square grands
are not able to supply Upright Piano legs at this time.
are furnished unassembled and unfinished, but they are finely sanded ready for
finishing. Authentic styling and easy assembly make these desks a convenient
solution to damaged grand desks.
Total width assembled is over size
in length. You will have to cut the parallel
horizontal wood rails of the
desk to the right length (Do your math carefully)
so that the end pieces are
snug on the mounting rail/support attached to the
inside of the cabinet of
This desk is furnished with necessary hardware for assembly
and use (Slide mounted on case not provided)
(Solid wood, Must be stained) -- Part Number -- SH1850H Sorry-not available at present time
Lid Props and Hardware
replacing a prop stick, be sure to put a rubber headed
tack on the stick
between the stick and the casting of the harp where
it is to rest.
Prop Stick-- Steinway
style-- With short stick inset
31" long, Plain hardwood unfinished--
Old Part Number-
SH851 $ 75.50
item without short stick or hinge pin.
Hard maple, finely sanded and ready for finishing.
30" long x 2-1/2 inches wide x 7/8 inches thick-- Each
x 2 inches wide x 7/8 inches thick-- Each
rubber headed tack sent with invoice-- For prop stick only--
This will only be done if you mention it
when you order by phone
Prop Mounting Bracket
Polished Brass- Three screw holes- Brass pin to connect prop to bracket
Mounts to the inside of the cabinet rim
to hold the butt end
lid prop. May not fit exactly in your old screw holes- You will need
to do some retro-fitting
Brass, and Nickel
Piano Desk Hardware
Piano Desk Hardware
Legs and Lyres and Hardware
Piano Pedal and Lyre Hardware
Piano Hardware Menu Page
ORDER BY PHONE WITH CREDIT CARD
Go to Mail Order Form for printing:
now take PayPal payment-- send email first.